Приложения разработчика UPRTek в Android Market

i.Copter Syma (v. 2.0.3)

UPRTek опубликовал приложение 2013-01-15
(обновлено 2015-04-18)

This app can control the helicopter after you connect the transmitter to the audio jack of Android.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

WL Toys (v. 2.1.1)

UPRTek опубликовал приложение 2013-01-15
(обновлено 2013-01-15)

This app can control the helicopter after you connect the transmitter to the audio jack of Android.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

Swann iFly (v. 1.4.4)

UPRTek опубликовал приложение 2013-01-15
(обновлено 2013-01-15)

This app can control the helicopter after you connect the transmitter to the audio jack of Android.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

Huajun RC (v. 1.3)

UPRTek опубликовал приложение 2013-01-01
(обновлено 2013-01-01)

This app can control the helicopter after you connect the transmitter to the audio jack of Android.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

Copter Controller (v. 1.9.2)

UPRTek опубликовал приложение 2012-12-31
(обновлено 2012-12-31)

PLEASE NOTE: This app requires the Lightspeed Phone Controlled Helicopter that you then control with this app.

Fly the Lightspeed 3.5 channel, gyro helicopter with your smartphone.

You can fly the Phone Controlled Helicopter via the virtual joystick or via motion control (tilt your smartphone).

Up to 3 Lightspeed helicopters can be flown at the same time by selecting an available band (A/B/C).

The Copter Control App works with the Lightspeed helicopter and transmitter that are sold separately and not available on the Android market. This app on it's own won’t control anything unless your purchase the Lightspeed helicopter separately, but you can still download it to see what the control interface looks like.

See www.i-helicopters.net for more details about how to purchase the Lightspeed Helicopter that works with this App.

Graupner Control (v. 1.3.4)

UPRTek опубликовал приложение 2012-12-30
(обновлено 2012-12-30)

This app can control the helicopter after you connect the transmitter to the audio jack of Android.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

udirc (v. 1.6.3)

UPRTek опубликовал приложение 2012-12-24
(обновлено 2012-12-24)

This app can control the helicopter after you connect the transmitter to the audio jack of Android device.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

uController (v. 1.9.7)

UPRTek опубликовал приложение 2012-11-22
(обновлено 2012-11-22)

This app can control the helicopter after you connect the transmitter to the audio jack of Android device.

This application has 5 parts:

1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sencer to control your helicopter.

SPL Technik (v. 2.0.3)

UPRTek опубликовал приложение 2012-11-17
(обновлено 2015-01-11)

This app can control SPL 995i helicopter after you connect the transmitter to the audio jack of Android phone.
This application has five controls:
1. On the left side of the screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.
2. On the right side of the screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.
3. On the bottom of the screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.
4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.
5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

MODELCO (v. 2.0.5)

UPRTek опубликовал приложение 2012-11-17
(обновлено 2015-01-11)

This app can control the helicopter or RC car after you connect the helicopter or RC car transmitter to the audio jack of Android.

For Helicopter control, this application has 5 parts:
1. On the left screen: This is helicopter's throttle, it can fly the helicopter in the air by move forward and land the helicopter when you move backward of it.

2. On the right screen: This function can control helicopter's direction, you just need to move it to up, down, left or right.

3. On the center of the bottom screen: You can use this trimmer to adjust the helicopter to left or right when the helicopter is keep rotating in the air.

4. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

5. On the upper right corner: You may turn on/off the g-sensor to control your helicopter.

For RC car control, this application has 4 parts:
1. On the left screen: This is car's throttle, it can move forward and backward when you move it.

2. On the right screen: This function can turn right or turn  left, you just need to move it to right or left.

3. On the center of the screen: Press "On" to start the controller; press "off" to turn off the controller.

4. Press the "MODEMOTION" : You may turn on/off the g-sensor to control your car.