Новые инструменты в Android Market

minimizeALL (v. 2.2)

Sandy Apps опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

Do you have anything to hide in your mobile? minimize ALL is the ultimate privacy protector app, which provides protection from friends accidentally seeing your private data. minimizeALL protects your privacy by minimizing all active windows when screen turns off. If messages or gallery is open and screen turns off, locked folders or app protectors will not prevent others from seeing it, when phone is unlocked.

Features
1. minimizes all active windows, protects privacy.
2. restores previous state when app is clicked again
3. runs in background, without knowing anyone knowing about this app.
4. hides your app usage from others to some extend.


Ad enabled version. Upgrade required for ad-free version. pls mail us if you want any other app in the list of apps to be minimized.

key words: minimize all, minimizeAll, minimizeALL

Femto Widget Pro (v. 1.5)

BluejaySysTools опубликовал приложение 2013-01-28
(обновлено 2015-05-24)

Femtocells are small personal cellular mobile  basestations installed in homes and connected to your broadband connection to improve your indoor cell phone coverage.

Most cell phones are unable to indicate when they are on the Femtocell.

This Widget detects Femtocells by looking at the Location Area Code (LAC) received by the mobile. The range of LAC used is different for each operator so set this to the values you see when you know you are on a Femto Cell.

-------------------------------------
FEATURES
-------------------------------------
The app has NO banners and NO ads.
Only works for 2G GSM or 3G UMTS phones

Notifications
  - Notification icon which changes to show
    2G/3G or Femtocell even when widget
    is not visible
  - Audio notification for 2G, 3G or Femtocell
  - vibrate when widget updated

Home Screen Widget
  - Display battery status
  - Large easy to read
  - Shows basestation information such as:
      2G, 3G, Femtocell or Airplane mode
  Cell ID and Location Area Code (LAC)
      GPRS, EDGE,  UMTS, HSDPA, HSPA, HSUPA
  - widget refresh period between 1 sec and 30s
  - updates can be always or only when screen on
  
Information and Logs
  - tap widget for phone,app and log information
  - logs up to 100 network reselections
  - export phone,app and log information
  
Femtocell Detection  
  - Customisable LAC range for Femtocell detection
  - Detects either 2G or 3G Femtocells (not CDMA)

Gas Rate Calculator Lite (v. 1.1.2)

Mr Combi Training опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

This is a the Lite version of Mr Combi's Gas Rate Calculator. It supports natural gas with a metric meter only.

Input the initial meter reading, use the built in 60 second timer and then input the final reading. Press the calculate button and the results will then be displayed on the screen.

Gas rates are given in cubic metres per hour, litres per second and cubic feet per hour. Gross and net heat inputs are given in kilowatts and BTUs per hour.

If you like this app then please purchase the full version which has the following extra features:

   1. Built-in guide with full gas rate calculations and let-by/tightness testing procedure

   2. Built-in conversion calculator

   3. Built-in let-by/tightness testing timers

   4. Works on all types of meter

   5. Metric and imperial calculators

   6. Supports natural gas, butane and propane

   7. Built-in torch

   8. Save manual calorific values for improved accuracy

   9. Select between a 1 and 2 minute timer for metric meters

   10. Selectable timer alert

   11. Supports 1ft³, 2ft³ and 5ft³ imperial test dials

   12. Email results to any destination

   13. No ads

All for only £2.00!

***Mr Combi Training would love your feedback on this app and suggestions for other apps that Heating Engineers would find useful. Please contact us at mrcombiapps@gmail.com

Manner mode by WiFi Trial (v. 1.0.5)

Hideki Ogawa опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

This is a trial version app. Can be used for 48 hours.

This application can not see that coming.

- The company, while the 10th floor to the seat of the normal mode, but the 8th floor conference room automatically set to silent mode.
- Such as apartments and dormitories, the normal mode when you are in his room, but at a friend's living room floor the other is automatically set to silent mode.

Method using GPS or other location is such that you can not!

Of course, this can of course.

- At home normal mode, but leaving the house automatically set to silent mode.

The GPS system is in automatic mode switching manner could fine scheme, WiFi is easy.

Now, who are interested, please come try this app.


This application is using the radio WiFi, is a very useful application that automatically ON / OFF for silent mode.
Usable in those who usually do not use the WiFi.


How to use

1. To start the app.
2. "Register" button and tap the access point to register any WiFi access point from the list.
3. "Start Service" button.

That's it.

After that, you automatically become a normal mode is within reach of radio access points registered, silent mode automatically when you move outside the coverage area.

The access point can register up to 10. They need to be connected to an access point is not so, "Register" is displayed if the access point, you can register at any access point.

There is no access point at home. I called. "Register" button please try. Just register for the access point if one access point appears in the list. This is OK.

Once you have registered once access point, then nothing is free, automatically every day, regardless of the hour is done ON / OFF for silent mode, depending on location.

If necessary, you can set the receiver sensitivity. Receiver sensitivity is a 5 star maximum sensitivity setting is the most fast response.


Caution

- Please keep the WiFi settings to ALWAYS ON.
- Sleep in the WiFi settings, there seems to be running and what not even sleep through the application of this model. Please set tested running on your terminal. If unsure, please try it as is anyway.
- This application is to operate by sensing changes in signal strength. Therefore, fixing the position of the terminal does not change while the very strong radio signal strength, may be sluggish.

Arduino BT Communication (v. 1.0.2)

Pedro Martínez Barrientos опубликовал приложение 2013-01-28
(обновлено 2013-01-28)

The Arduino BT Communication is an application to able you test your Arduino BT Board with Ardroid devices using Bluetooth communication.

With Arduino BT Communication you are able to test each pin available in your board; you have an screen with al input pins as progress bars to see its values and output pins as toggle buttons and seek bar to turn off and turn on pins.

Examples of sensors of actuators you can attach to your board:
1. LEDS
2. Relays for high power phases
3. Measure temperature
4. Measure light

We hope you find plenty of hours of fun with your Arduino BT Board

This is the code you need to upload to your Arduino BT board in order to play with the Android application:



char strEntrada[14]={'H','H','H','H','H','H',1,1,1,1,1,1,'r','n'};
char strSalida[27]={-1,-2,-3,'1','1','1','1','1','1',-4,-5,-6,'l','l','l','l','l','l','l','l','l','l','l','l',-3,-2,-1};

void setup()
{  
  Serial.begin(115200);
  
  //Salidas digitales
  pinMode(2, OUTPUT);    
  pinMode(4, OUTPUT);
  //pinMode(7, OUTPUT);
  pinMode(8, OUTPUT);
  pinMode(12, OUTPUT);
  pinMode(13, OUTPUT);
  
  //Salidas PWD
  pinMode(3,OUTPUT);
  pinMode(5,OUTPUT);
  pinMode(6,OUTPUT);
  pinMode(9,OUTPUT);
  pinMode(10,OUTPUT);
  pinMode(11,OUTPUT);
  analogReference(DEFAULT);
}
void loop()
{
  strSalida[3]=analogRead(A0)/8;
  strSalida[4]=analogRead(A1)/8;
  strSalida[5]=analogRead(A2)/8;
  strSalida[6]=analogRead(A3)/8;
  strSalida[7]=analogRead(A4)/8;
  strSalida[8]=analogRead(A5)/8;

  for (int indice=0;indice<11;indice++)
  {
    strSalida[12+indice]=strEntrada[indice];
  }
  
  if( Serial.available()>=11)
  {
for(int i=0; i < 12; i++)
        {
   strEntrada[i] = Serial.read();
        }        
        
          for (int indice=0;indice<11;indice++)
          {
            strSalida[12+indice]=strEntrada[indice];
          }
        Serial.println(strSalida+'');
        Serial.flush();
  }

    if( strEntrada[0] == 'H' ) {digitalWrite(2, HIGH); } else { digitalWrite(2, LOW);}
    if( strEntrada[1] == 'H' ) {digitalWrite(4, HIGH); } else { digitalWrite(4, LOW);}
    if( strEntrada[3] == 'H' ) {digitalWrite(8, HIGH); } else { digitalWrite(8, LOW);}
    if( strEntrada[4] == 'H' ) {digitalWrite(12, HIGH); } else { digitalWrite(12, LOW);}
    if( strEntrada[5] == 'H' ) {digitalWrite(13, HIGH); } else { digitalWrite(13, LOW);}
    analogWrite(3, interpretarEntrada(strEntrada[6]));
    analogWrite(5, interpretarEntrada(strEntrada[7]));
    analogWrite(6, interpretarEntrada(strEntrada[8]));
    analogWrite(9, interpretarEntrada(strEntrada[9]));
    analogWrite(10, interpretarEntrada(strEntrada[10]));
    analogWrite(11, interpretarEntrada(strEntrada[11]));
    delay(10);        
      
}
int interpretarEntrada(char caracterEntrada)
{
  int resultado=0;
  resultado=caracterEntrada*2;
  return resultado;
}

Birthday LIST (v. 2.5)

HOSEI SHOKAI опубликовал приложение 2013-01-27
(обновлено 2013-01-27)

It is the free application which can check the days and age
by a birthday by registering the data of a birthday.

The person near a birthday can be displayed on a home screen by using a widget.

It can avoid forgetting to celebrate by registering the birthday of a family
or a friend.

*This application is equivalent to Japanese and English.

----- Features --------------------------------------
1. Name, sex, date of birth and memo can be registered.
    *You can input year between 1868 to 2020.

2. Displays age, constellation and the number of days
    following birth from the registered date of birth.

3. The list of less than 9 days till a birthday on a Widget.
    The list is 4 lines.
    The list order by remaining days.
    (Click a widget and it starts application.)

4. Detail is displayed that list item clicked for a long time.
    *In addition to the display item of a list, the days
     display of age, a birthstone, and a memo are expressed
     as a detailed screen.

5. Data CSV import/export.

*The birthday of list can be changed by setup of the date format of a terminal.
Therefore, the day-of-the-week display of a birthday is possible.
-------------------------------------------------

Frame or improvements, please let us know in the review.
We can be considered to meet the needs of everybody.

Twitter
https://twitter.com/hoseishokai

Spy Control Free (v. 2.0)

UAS опубликовал приложение 2013-01-27
(обновлено 2013-01-27)

Application allows you control mobile phone via SMS commands, receive information about incoming and outgoing sms and calls and perform many other actions.

Key features that can be implemented via SMS-commands:
- keep records of all outgoing and incoming SMS-messages, similar to tracking phone calls. You can quietly collect a database of all messages (including content of messages) even if messages are removed by someone;
- lock the phone and turn on a loud warning signal. During the blocking the screen will always appear the same form, to hide which would need to be password;
- forward SMS-messages (re-sending to specified number). You can forward all incoming messages to a specific number phone. In this case, all incoming messages can be hidden, ie, they will not be stored on your phone on which the application is installed;
- obtaining the approximate location of the phone;
- obtain IMEI of the mobile phone;
- get list of missed calls (with phone number and name of the caller);
- get list of unread SMS (indicating a telephone number and name of the sender);
- know the name of a contact from the phonebook to the phone number you requested;
- obtaining contact details of the phone book on his behalf. You can get telephone and E-mail addressed;
- change ring volume.


Full version contains:
- no launch icon in menu;
- lock phone;
- receive list of all incoming, outgoing and missed calls in the last n hours;
- get a list of (name and number) of all incoming and outgoing SMS message over the last n hours;
- keep records of all outgoing and incoming calls. All data will be stored in memory of the phone and are hidden. So you can quietly collect a database of all calls, even if the call history is cleared by someone;
- send a SMS to a specific numbers when unknown SIM-cars is inserted. This is useful, for example, when your phone is in someone else's hands (the thief or robber - they usually use their own SIM-card) and you need to know telephone number;
- know the name of a contact from the phonebook to the phone number you requested;
- obtaining contact details of the phone book on his behalf. You can get telephone and E-mail addressed;
- change ring volume.

Spy Control (v. 2.0)

UAS опубликовал приложение 2013-01-27
(обновлено 2013-01-27)

!! YOU CAN LAUNCH THE APPLICATION BY DIALING THE NUMBER 0000
It's a hint to hide the application icon.
Uninstall free version, if it is installed.

Application allows you control mobile phone via SMS commands, receive information about incoming and outgoing sms and calls and perform many other actions. Response can be received via SMS or E-mail.

Key features that can be implemented via SMS-commands:
- keep records of all outgoing and incoming SMS-messages, similar to tracking phone calls. You can quietly collect a database of all messages (including content of messages) even if messages are removed by someone;
- lock the phone and turn on a loud warning signal. During the blocking the screen will always appear the same form, to hide which would need to be password;
- forward SMS-messages (re-sending to specified number). You can forward all incoming messages to a specific number phone. In this case, all incoming messages can be hidden, ie, they will not be stored on your phone on which the application is installed;
- obtaining the approximate location of the phone;
- obtain IMEI of the mobile phone;
- get list of missed calls (with phone number and name of the caller);
- get list of unread SMS (indicating a telephone number and name of the sender);
- know the name of a contact from the phonebook to the phone number you requested;
- obtaining contact details of the phone book on his behalf. You can get telephone and E-mail addressed;
- change ring volume;

- no launch icon in menu;
- lock phone;
- receive list of all incoming, outgoing and missed calls in the last n hours;
- get a list of (name and number) of all incoming and outgoing SMS message over the last n hours;
- keep records of all outgoing and incoming calls. All data will be stored in memory of the phone and are hidden. So you can quietly collect a database of all calls, even if the call history is cleared by someone;
- send a SMS to a specific numbers when unknown SIM-cars is inserted. This is useful, for example, when your phone is in someone else's hands (the thief or robber - they usually use their own SIM-card) and you need to know telephone number;
- know the name of a contact from the phonebook to the phone number you requested;
- obtaining contact details of the phone book on his behalf. You can get telephone and E-mail addressed;
- change ring volume.

富士山頂上までの直線距離 (v. 1.1)

THREAD CO.,LTD опубликовал приложение 2013-01-27
(обновлено 2013-01-27)

富士山の優美な風貌は、日本国内のみならず日本国外でも日本の象徴として広く知られている。
古来より霊峰と呼ばれ、富士山を開いたのは富士山修験道の開祖とされる富士上人であると伝えられる（『本朝世紀』）。
(Wikipedia 富士山より)

Caynax Hourly Chime (v. 3.3.1)

Caynax опубликовал приложение 2013-01-27
(обновлено 2013-01-27)

This is simple hourly chime (hourly alert, hourly beep) application.

Settings:
- hours to set (ie. from 8AM to 10AM and from 2PM to 4PM)
- chime (sound) - any sound from phone - no need to download and pay for additional ringtones
- chime volume - individual level for each chime
- days of week (ie. Mon-Wed and Friday)
- chime in silent mode
- chime in vibrate mode
- vibration
- chime at :15, :30, :45 min
- chime in wired headset mode
- chime in Bluetooth headset mode
- chime only when screen is on

No Ads. Small application size.

NOTICE: Don't move application to sdCard - it won't work properly.

NOTICE: Don't use task killers.

Permission MODIFY_AUDIO_SETTINGS is used to detect whether headset is connected.